Whittier Wood Products 731W Manual Del Usuario página 8

FIG. 10
TO INSTALL THE ADJUSTABLE SHELVES:
10) Stand unit upright. Determine where you want to place the Adjustable Shelves (I). Tap the Shelf
Brackets (S) into the four holes with the flat side down to support each shelf. See FIGURE 9A.
Install the shelves as shown in FIGURE 10. You may fasten the shelves by inserting a #6 x 3/8"
Brass Screw (T) through the hole in the bottom of the shelf bracket and screwing it into the
adjustable shelf. See FIGURE 10A.
FIG. 11
11) For maximum stability, a bracket and screws for attaching the unit to the wall have been provided.
Position unit at desired location. Locate stud in wall behind unit. Attach "L" Angle Bracket (ZE) to
wall stud with #8 x 1¼" Pan Head Screw (ZD) so other half of bracket may be attached to top of
unit with #8 x 5/8" Pan Head Screw (ZC). See FIGURE 12. If stud in wall cannot be located,
purchase proper wall attachment hardware for your type of wall and secure the unit.
PAGE 8 — 731W
All manuals and user guides at all-guides.com
ZE
Side Panel
I
I
T
Stud
ZD
ZC
Top
S
FIG. 10A