Positioning And Removing The Dc65 - AXXAIR DC65-M1 Instrucciones De Manejo

English

3.4 Positioning and removing the DC65:

NOTE: always unplug the machine before doing any work on the tool.
Doing this will prevent any accidental operation.
Fitting the DC65:
- Install the assembly on the drilling spindle as far as the stop
- Screw in the red ring, to lock the assembly.
Removing the DC65:
- Unscrew the red locking ring.
- Remove the machine from the.DC65
- 19 -
Z.I. Les Bosses
F-26800 ETOILE-SUR-RHONE
www.axxair.com