Changing The Light Bulb; Regulations, Standards, Guidelines - AEG Electrolux SANTO 75428-2 DT Manual De Instrucciones

Changing the light bulb

Warning! There is a risk of electric shocks! Before changing the light bulb,
switch off the appliance and unplug it, or pull the fuse or the circuit breaker.
Light bulb data: 220-240 V
1. To switch off the appliance, unplug the
mains plug.
2. If it becomes necessary to replace the
lamp, prize out the lamp cover as
shown in the figure.
3. Change the defective light bulb with
one of the some power (the maxi-
mum power is shown on the light
diffuser).
4. Refit the light bulb cover.
5. Put the appliance back into opera-
tion.

Regulations, Standards, Guidelines

This appliance was designed for household use and was manufactured in
accordance with the appropriate standards. The necessary measures in
accordance with appliance safety legislation regulations (GSG), accident
prevention regulations for refrigeration appliances (VBG 20) and the regu-
lations of the German Society of Electrical Engineers (VDE) were observed in
the manufacture of this appliance.
The refrigerant circuit has been checked for leaks.
This appliance is in accordance with the following EU guidelines:
– 73/23/EWG dated 19 February 1973 - low voltage guidelines.
– 89/336/EWG dated 3 May 1989
(including guideline change notice 92/31/EWG) - EMV guideline
All manuals and user guides at all-guides.com
23