Technical Info - Marshall MID BLUETOOTH Manual Del Usuario

TECHNICAL INFO

TROUBLESHOOTING
NOT POWERING ON
NOT CHARGING
NOT PAIRING
NO SOUND
POOR SOUND QUALITY
h_Marshall-Mid-user-guide-160921.indd 6
All manuals and user guides at all-guides.com
CHARGE THE HEADPHONES USING THE USB CABLE.
MAKE SURE THE USB POWER SOURCE IS SWITCHED ON.
MOVE THE DEVICES CLOSER TO EACH OTHER AND AWAY FROM ANY INTERFERENCE OR OBSTRUCTION.
MAKE SURE THE HEADPHONES ARE NOT CONNECTED TO A DIFFERENT SOUND SOURCE WHEN ENTERING
THE PAIRING MODE.
DISABLE AND ENABLE BLUETOOTH COMMUNICATION ON YOUR SOUND SOURCE.
MAKE SURE THE HEADPHONES ARE ON AND CONNECTED.
MAKE SURE THE SOUND SOURCE IS PLAYING.
MOVE THE DEVICES CLOSER TO EACH OTHER AND AWAY FROM ANY INTERFERENCE OR OBSTRUCTION
TRANSDUCER:
• 40 MM, DYNAMIC
IMPEDANCE:
• 32 OHM
FREQUENCY RANGE:
• 10 Hz-20 kHz
SENSITIVITY:
• 100 mV @ 1 kHz = 95 dB SPL
ENGLISH
2016-09-21 10:22
006