Plaque And Stain Remover; Cleaning - Nevadent NZPS 3 A1 Instrucciones De Uso

Plaque and stain remover

Use the plaque remover 9 and the stain remover 0 to remove stains and plaque from
the teeth .
1) Remove the protective cap .
2) Guide the tip of the plaque remover 9 or the stain remover 0 onto the affected
area . Start with the part of the tooth closest to your gums . Now guide the tip
towards to end of the tooth . Repeat the process until the plaque or stain has been
successfully removed .
3) Replace the protective cap .

Cleaning

CAUTION
Damage to the appliance!
► To avoid irreparable damage, ensure that no moisture penetrates the appliance
during cleaning .
■ Clean the surfaces of the appliance and the accessories with a damp cloth moistened
with a standard commercial denture cleaning fluid .
■ To clean the polishing cap 2, remove it as described in the section "Removing the
polishing cap" . Rinse the polishing cap 2 under running water . Allow the polishing
cap 2 to dry before screwing it back onto the attachment thread 1 . We recommend
cleaning the polishing caps 2 in a standard commercial denture cleaning fluid
every 2 – 4 weeks .
NZPS 3 A1
GB │ MT │ 51 ■