bol for the standard program Mix & Freeze
blinks.
11. The appliance is ready for operation.
12. You can now select the desired program with
the "Menu" button. The selected program is
indicated by a corresponding symbol.
13. The following programs are available:
symbol
Program
Mix and Freeze
Freeze
Mix
Mix and freeze
For normal ice cream making, preset to
60:00 minutes.
You can select the desired time by pressing
the Time + and Time - buttons. The buttons
allow you to set the time in 1 minute inter-
vals between 60 and 0.
freeze
If the ice cream does not have the desired
consistency after completion of the pro-
gram, you can use this program to freeze it
longer, for a maximum of 60 minutes.
Mix
To mix the ingredients thoroughly before
starting the program, please select this
program before making the ice cream. The
ingredients are mixed for a maximum of
30 minutes.
14. Important: once you have selected a pro-
gram, you cannot change it while the pro-
gram is running. You then have to use the
POWER switch to switch the appliance off
and back on again. However, the "Mix and-
Freeze" and "Mix" programs can be paused
by pressing the START/PAUSE button. If you
pause the program, the time which was set
will continue running. As soon as you press
the START/PAUSE button again, the appli-
cleaninG anD care
1. Before cleaning, always turn off the appliance,
unplug it from the electrical outlet and allow
the appliance to cool.
All manuals and user guides at all-guides.com
ance will resume operation. The "Freeze"
program cannot be paused.
15. Now press the START/PAUSE button. The
appliance starts mixing the ingredients.
16. The remaining time is shown on the display.
17. During operation you can extend the ope-
rating time by pressing the Time + button
in intervals of one minute to a maximum of
60 minutes.
18. After expiration of the set time the appli-
ance automatically switches off and a signal
beeps ten times. The display shows 0:00.
19. If the ice cream is not removed within
10 minutes after the "finished" signal, the
automatic cooling function switches on to
prevent the ice cream from melting.
20. The automatic cooling function keeps the
ice cream cold for a maximum of one hour.
Remove ice cream
21. Before removing the ice cream from the
appliance, switch off the appliance with the
POWER switch and unplug the power cord
from the electrical outlet.
22. Remove the transparent lid.
23. Remove the ice cream container from the
appliance and carefully pull the mixer out
of the container.
24. Transfer the ice cream to a suitable contai-
ner. Do not use sharp or pointed objects for
this; instead, use a plastic or wooden spoon
in order not to damage the ice cream contai-
ner. We recommend using a silicone dough
scraper.
25. If desired, you can make more ice cream
right away. In this case, start again with step
number 1.
26. Tip:
If you make fruit ice cream or sorbet, remove
the ice cream container as soon as the
program is finished, transfer the ice cream
to a container suitable for freezing and put
this container in the freezer so that the ice
cream freezes completely. Otherwise, this
ice cream may be slightly soft inside, even
if it is firmly frozen on the outside.
27. If you do not wish to make more ice cream,
switch the appliance off with the POWER
switch and unplug it from the electrical out-
let.
2. Never clean the appliance with or under
water or other liquids. It is especially impor-
tant to keep the motor and the compressor
from coming into contact with water.
17