Satelec SUPRASSON P5 NEWTRON Manual Del Usuario página 15

All manuals and user guides at all-guides.com
F
AULT
No operation • Defective mains cord connection
• Presence of fluid or moisture between
• Blown fuse
No spray • Defective water nose connection
• No water pressure
• Clogged filter or defective solenoid
No water at tip but • Obstructed tip or file
vibration present
• Wrong tip selection
• Incorrect spray adjustment
Insufficient power • Worn or deformed tip
Low vibration • Incorrect use : wrong angle of
• Presence of fluid or moisture between
No ultrasonic output • Incorrect tip tightening
• Defective connector contact
• Cut wire in handpiece cord
Water leak between • Worn sealing gasket (1,15 x 1) in
handpiece and its base or
at junction between
handpiece or cord
P
OSSIBLE CAUSE
handpiece and cord
valve
application or inadequate pressure on
tooth
handpiece and cord
handpiece
R
EMEDY
• Check mains socket
• Dry any moisture, especially
on electrical contacts
• Return to SATELEC After
Sales Service
• Check water supply
• Check pressure of mains
• Clean or replace filter
• Return to SATELEC After
Sales Service
• Remove obstruction for tips
or file
• Check tip
• Adjust spray
• Replace tip
• See tip utilization method
in Tipbook
• Thoroughly dry electrical
contacts
• Tighten with wrench
• Clean cord contacts
• Return to SATELEC After
Sales Service for cord
replacement
• Replace gasket (kit F00070)
15