Cleaning the appliance
Clean plastic parts with a damp, non-abrasive cloth and dry them with a dry cloth. Do not use
abrasive products to clean the device.
Descaling cleaning
To prolong the life of your iron, we recommend that this procedure be carried out at regular intervals
the impurities from inside the soleplate thanks to the steam and hot water, we suggest you to carry
out this operation over a basin.
- Carry out the operations described in the paragraph "Filling the tank during use".
and steam and hot water will come out from the soleplate holes removing limescale and deposits
from within the soleplate.
- Gently move the iron back and forth until the tank is completely emptied.
operation.
Before using the appliance, clean the soleplate on an old cloth to make sure that the soleplate
and tank are clean and to allow residual test water that has remained inside the pipes to vaporize.
Tank cleaning
To clean the tank, insert fresh water, rinse and drain.
Caution. Risk of material damage
Do not pour vinegar, descales or other scented substances into the tank. Penalty the end of
warranty.
The warranty does not cover damage caused by clogging due to lime.
Cleaning the soleplate and shell
Any deposits and other residue on the soleplate can be removed using a cloth soaked in a water
and vinegar solution.
Clean plastic parts with a damp, non-abrasive cloth and dry them with a dry cloth.
Cleaning the accessories
Remove accessories from the appliance.
2. To clean the brush, remove the dust with your hands.
To clean the wrinkles accessory, move it from right to left on a dry towel.
23