Intended Use; Safety Information - BGS technic 9606 Manual Del Usuario

Balance Shaft Alignment Tool Set for
Land Rover, Citroen, Mitsubishi, Peugeot, Ford
TOOLS
1 Balance Shaft Locking Tool,
to be used as OEM 303-1329
2 Backlash Lever,
to be used as OEM 303-1330
3 Balance Shaft Alignment Tool,
to be used as OEM 303-1328, 0190D

INTENDED USE

This tool set includes the tools listed above for adjusting balance shaft on Land Rover, Citroen,
Mitsubishi, Peugeot and Ford 2.2L DOHC Diesel engines.
More information regarding this item and a list of suitable engines and models can be found on our
website: www.bgstechnic.com

SAFETY INFORMATION

•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Never place the tool on the vehicle battery. There is a risk of a short circuit.
•
Be careful when working with the engine running. Loose clothing, tools and other objects can be
caught by rotating parts and cause serious injury.
•
Keep children and other unauthorized persons away from the work area.
•
Be careful when working on hot engines because of the risk of burn injuries.
•
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage.
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
•
After repair or before starting the engine, turn a minimum of 2 turns by hand and check the
timing again.
•
Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified)
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
2.2 DOHC Diesel Engines
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
3
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Art. 9606
2
1