BGS technic 62640 Manual Del Usuario página 4

INSTRUCTION
Crankshaft Locking Tool (1)
Rotate crankshaft until arrow (A) on the tool points at the marking of the crankshaft wheel (B) and
the tool's pivot (C) fits into the borehole of the engine (D).
Camshaft / Pump Locking Pin (2)
Camshaft should be in locking position, now. Only then, you will be able to push the tool through
the camshaft's borehole and into the cylinder head.
When camshaft is shifted about 180°, you need to rotate the crankshaft another full turn.
Idler Locking Plate (3)
Pre-tension the idler with a suitable tool and lock the idler by
inserting the locking plate laterally.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
C
B
1
2
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
D
1
A
2
3
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
1