Uline H-4862 Instrucciones De Montaje página 3

PAGE 3 OF 9
ASSEMBLY CONTINUED
6. Attach front/back supports at the desired next level.
Attach shelf support, then lay the steel shelf on the
shelf support. (See Figure 6)
Repeat step 6 for the next 2 shelves.
Figure 6
7. Attach remaining front/back support and shelf support.
Lay the last steel shelf on the shelf supports.
(See Figure 7)
Figure 7
8. Once the shelves are in place, if additional stability is
desired, secure the shelves with nuts and bolts (F). Fully
tighten. (See Figure 8)
Recommended number of nuts and bolts per shelf are as
follows:
• 36" / 48" / 60" W − 2 Nuts and Bolts
• 72" W − 4 Nuts and Bolts
Figure 8
1-800-295-5510
uline.com
NOTE: Bottom shelf does not require nuts and bolts.
NOTE: Insert bolts in both the front and rear of
the unit. Ensure bolts go through the shelf, shelf
support, and front/back support.
0321 IH-3120