Sharpening The Blades; Basic Safety Guidelines - Tramontina TRO25 Manual De Uso

Ocultar thumbs Ver también para TRO25:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Green twig funnel
To shred green twigs of up to Ø 1", use the twig funnel, [Fig. 19, page 09].
Green feed chute
Use the feed chute to shred all other materials mentioned in this manual, [Fig. 20, page 10].
To carry out any maintenance or adjustment work, turn off the engine and unplug appliance
from the power outlet.
Blades
The shredder has tempered blades, which extends their cutting life. Do periodic checks to verify that the
screws on the blades and other parts of the appliance are securely tightened.

Sharpening the blades

Sharpen the blades when you notice that they have gone blunt, and replace them when they
can't be sharpened anymore. In order to do that, remove the screws as indicated in the image,
[Fig. 21, page 11]. Sharpen only the indicated side of the blade, trying to stick to the original inclination,
[Fig. 22, page 11]. Remove the material from each blade evenly to prevent damage to the balance
of the axis package, which will result in vibrations. Periodical re-tightening the screws is essential to
ensure the shredder's good performance.
Inspect the shredder before using it and check if there aren't any tools or objects inside the
chute or funnel.
Never operate the shredder when the feed chute is open.
Do not use a power cable with seams, as there is a risk of electric shocks.
If the shredder does not operate to full power, contact Tramontina's Technical Support to verify the
conditions of your power network, thus preventing the engine from burning out.
Always re-tighten the screws of the shredder, mainly the ones of the blades, after a harder impact.
Keep children and animals away from the appliance when it is operational.
Do not allow inexperienced people to operate the shredder without reading the instructions
manual first.
Do not use the shredder during periods when power cuts are likely to happen.
Do not use the shredder for any other purposes not specified in this manual.
It is recommended that spare parts be always of the same model and branded Tramontina.
MAINTENANCE

BASIC SAFETY GUIDELINES

17
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido