Maintenance; Safety First; Lubricants; Main Inspection - JCB XR Serie Manual Del Usuario

15

Safety First

! ! WARNING
Maintenance work must only be done by competent
personnel.
A-3-1-1
! ! WARNING
Equipment Condition
Defective equipment can injure you or others. Do not
operate equipment which is defective or has missing
parts.
Make sure the maintenance procedures in this manual
are completed before using the equipment.
A-1-4-1
! WARNING !
Before doing any routine maintenance work on the
attachment while it is installed on the carrier, make the
carrier safe. Stop the engine and, if appropriate, ensure
that the parking brake is engaged and the drive is in
neutral. Remove the starter key to prevent the engine
being started.
B-3-1-2/3

Lubricants

In the EEC all JCB lubricants are covered by individual
COSHH (Control of Substances Hazardous to Health)
leaflets which are available on request from your JCB
Distributor.
It is most important that all personnel concerned with
lubricants read and understand the information contained
in the relevant leaflets.
Some general guidance is given in the JCB Carrier Machine
Handbook.
All manuals and user guides at all-guides.com

MAINTENANCE

A1461-1

Main Inspection

We recommend that the following inspection is done dur-
ing the first 50 - 100 hours of operation of a new Trencher
attachment. It is advisable to have this work done by your
JCB Distributor.

Check

1 Torque tightness of all mounting and securing
bolts/nuts.
2 All hydraulic connections.
3 For hydraulic hoses rubbing (check throughout full
operating pressure).
4 Trencher operating pressure/flow (see SPECIFICA-
TION).
5 Hydraulic oil temperature during continuous operation
(see SPECIFICATION).
6 Correct operation of Spoil Auger.
7 Correct operation of Trench Cleaner Assembly.
8 Check digging teeth for cracks and wear.
9 Change the carrier hydraulic filter(s).

Obtaining Replacement Parts

We recommend that you fit only genuine JCB replacement
parts. Your distributor will need to know the equipments
serial number, which is stamped on the Trencher data
plate(see GENERAL DESCRIPTION section).

Washing

Periodically, and before doing any maintenance work, we
recommend that the outside of the Trencher is steam
washed. Ensure that the pressure and return lines are
plugged before washing, to prevent ingress of moisture.
15