Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
13. LIGHT BULBS
This range hood uses 50W halogen lamps. (120V, 50W, PAR 20)
1. Install the lamps by rotating them clockwise into their socket holder.
2. Install chrome rings by pushing upward.
14. INSTALL FILTERS
It is recommended to install side filters first and finish with center one(s).
1.
Insert upper end of filter into the hood (tab end).
2.
Raise lower end toward the inside of hood.
3.
Position lower end of filter into channel and pull.
4.
While pulling the filter, slide it under the inner retaining piece.
Baffle filters are available as an option (see instruction sheet included with baffle filters).
HD0009
15. USE AND CARE
Grease filters and impeller(s).
The grease filters, impeller(s) and grease rail should be cleaned frequently. Use a warm detergent
solution. Grease filters and impeller are dishwasher safe.
Remove filters by pushing filters towards the back of hood and rotating filters downward.
HD0056
- 10 -
HD0078
Publicidad
Tabla de contenido
