Mode 1 (Detergent + Fabric Softener) - Brightwell Duoplus Manual Del Usuario

P
ROGRAMMING
SETTINGS
PUMP 2 DEFAULTS
CHEMICAL-ENABLE
MODE 1
D/GENT-SOFTENER
PUMP 1 SPEED
100%
B L S - D
RIGHTWELL AUNDRY YSTEMS UOPLUS
-
S O
ELECTING
From the SETT ING screen, press the
PUMP 2 DEFAULTS
CHEMICAL-DISABLE
Use the UP and DOWN
Module:
CHEMICAL-ENABLE
Pump 2 will be automatically disabled unless button 2 on the Formula Module is
pressed to enable it.
CHEMICAL-DISABLE
Pump 2 will be automatically enabled unless button 2 on the Formula Module is
pressed to disable it.
Press the FORWARD/ACCEPT
CAUTION:
!
Extreme caution must be taken as some de-stainers and softeners may
damage certain linens.
MODE 2
D/GENT-DESTAINER
Use the UP and DOWN

MODE 1 (DETERGENT + FABRIC SOFTENER)

Pump 1 (rear) will be used for the detergent, pump 2 (front) will be used for the
fabric softener.
Pump 1 will run on inputs 1(Pre-wash), 2A(main wash - cold) and/or 2B (main
wash - hot).
Pump 2 will run on input 3.
The unit will reset after pump 2 has run.
MODE 2 (DETERGENT + DESTAINER)
Pump 1 (rear) will be used for the detergent, pump 2 (front) will be used for the
destainer.
Pumps 1 & 2 will run on input 1(Pre-wash), inputs 2A(main wash - cold) and/or
2B (main wash - hot).
Input 3 will then be used to reset the unit.
Press the FORWARD/ACCEPT
M
PPERATING ODE
FOWARD/ACCEPT
These screens will not appear if the Formula Module is
not connected.
keys to select the required setting for the Formula
key to confirm your selection and move on.
keys to select between MODE 1 and MODE 2.
key to confirm your selection and move on.
E
NGLISH
key to move on.
8