Hot Laminating Procedures - Royal Sovereign APL-230 Manual Del Usuario

8. This machine is intended for indoor use only.
9. Do not operate machine if plug or cord is damaged.
HOT LAMINATING PROCEDURE
1. Do not laminate pouch film alone.
2. When using a small pouch, place the film into the middle area (Sensor area)
of the machine. (There is only one sensor in the middle area of a machine.)
3. Place the item to be laminated into the pouch film.
4. Place the pouch film into the front opening of the laminator with the sealed end
first.
NOTE: If the front sensor is touched for more than 3 seconds, it can
automatically start the anti-jam system. If this occurs the rollers will reverse and
you will not be able to laminate.
5. Anti-jam system will continue for approximately 15 seconds. You can
try laminating again after 15 seconds.
NOTE: Your finished laminated item will be hot,and will easily bend.
To keep your laminated item flat , place on flat surface and allow to cool.
All manuals and user guides at all-guides.com
If the room temperature is low(under 64 °F),The ready light
may take longer to come on.
Contact a qualified electrician.
5
APL-230/330