Wilfa NATURE HU-400WW Manual De Instrucciones página 17

HOW TO CLEAN THE TRANSDUCER
• Clean with clean water of citric acid if there is scale in it.
• Brush off the scale from the surface.
• Rinse the transducer with clean water.
HOW TO CLEAN THE BASE
• Clean the inner surface of the main base with a soft cloth or use citric acid if
there is scale in it.
• If the scale covers the security switch, drop some citric acid on it and let it sit
for 2-5 minutes on the scale and clean it with a brush.
• Rinse the water tank with clean water.
HOW TO CLEAN THE CERAMIC FILTER
• Clean and activate the ceramic ball after using 1000L water. Depending on
the water quality. If the ceramic ball is dirty it needs to be cleaned more
frequently.
• It can be dipped into vinegar for 5 minutes, then rinse it with water.
• Put the filter under the sun for 4-6 hours to dry, over over night.
NATURE · HU-400WW
15
EN