Uline H-6256 Manual De Instrucciones página 2

3. Secure legs to crossbrace with set screws using 5/32"
Allen wrench. (See Figure 3)
Figure 3
4. Stand table upright and place tabletop onto legs,
inserting legs into the tabletop gussets. With a 5/32"
Allen wrench, tighten set screw on each gusset.
(See Figure 4)
Figure 4
PAGE 2 OF 9
ASSEMBLY CONTINUED
5. Level table with the adjustable feet. Adjustable feet
allow approximately 1" of adjustment. (See Figure 5)
Figure 5
0521 IH-6256