Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
A nut channel runs the entire length along the rear side of the loudspeaker. When an end cap is removed, a nut
may be inserted into the channel for use with custom external rigging or mounting brackets
Attaching the loudspeaker to a flat panel display requires the use of a custom mounting bracket depending on the
display type being used. Some third party mounting bracket manufacturers offer solutions specifically designed for
flat panel display attachment which is compatible to their existing flat panel mounting systems.
■ Acoustic Sealing
IMPORTANT: When not using the L-brackets to mount the loudspeaker the end holes must be sealed by placing
either the L-bracket screws or the included hole plugs into the end holes.
■ SRS WOW HD digital signal processing
The loudspeaker contains internal digital signal processing which has been factory tuned to provide an optimum
frequency response including SRS WOW HD processing including equalization and TruBass low frequency extension.
The action of the DSP is engaged by setting DIP switch #2 behind the end cap to ON.
"WOW HD significantly improves the playback quality of audio, delivering a dynamic 3D
entertainment experience with deep, rich bass and high frequency clarity for crisp detail."
is a trademark of SRS Labs, Inc.WOW technology is incorporated under license from SRS Labs, Inc.
■ Recycling
Attention to product quality in the design phase ensures, firstly, that products have a long life and that, secondly,
all parts of a product may be reused or recycled at the end of that life. An extensive product servicing network
ensures that products can be repaired in the event of the premature failure of a part, or as a way to prolong the life
of a product that would otherwise be considered a candidate for landfill. Eventually there comes a time when a
product is considered beyond repair (for economic reasons or lack of parts), so the parts must be disposed of in a
suitable manner. The disposal should conform to local environmental regulations and be conducted in an
authorized recycling facility. This product consists of some or all of these components:
Item
Loudspeaker
Packing Material
User Manuals and Sales Literature
Installation and Operating Manual CLS FX Series
L-bracket mounting method
Material
Steel, Plastic, Copper, electronic
devices
Cardboard, wood and/or plastics
Paper and cardboard
Klein + Hummel
Recycling Instructions
Recycling only in authorized
recycling plants
Separate materials then recycle
Recycle
English
4
Publicidad
Tabla de contenido
