Pfeiffer Vacuum TPG 366 Instrucciones De Instalación página 3

Installation in a Con-
trol Panel
Guide rail
Fig. 1: Guide rail on the rack module adapter
 It is advisable to fit a guide rail to the rack module adapter to ease the pressure on the
front panel of the device.
Rack mounting
Thermal overload!
 When setting up the device, ensure that the maximum permissible ambient temper-
ature (due to installation or solar radiation, for instance) is not exceeded.
 Ensure that there is good air circulation!
 Secure the rack module adapter in place in the switchgear cabinet.
 Slide the device into the rack module adapter.
 Secure the device in place using the screws supplied with the device.
Fig. 2: Slide in the device and fasten it in place
Loss of the protection class of the rack
If the product is installed in a rack, it is likely to lower the protection class of the rack
(protection against foreign bodies and water) e.g. according to the EN 60204-1 regula-
tions for switching cabinets.
 Take appropriate measures for the rack to meet the specifications of the protection
class.
NOTICE
NOTICE
Installation
3