Usermeth - Metrohm 774 Oven Sample Processor Manual De Instrucciones

5 Descripción detallada
5.11.4.10
5.11.4.11
5.11.4.12
5.11.4.13
5.11.5 &UserMeth ...
5.11.5.1
5.11.5.2
5.11.5.3
124
.Heater.S Stop: Switching off of the heater
.E Error: Message with error number (see page 102)
Format of AutoInfo messages:
(space)!device name"AutoInfo node"
Example: !Oven1".G"
Setup.PowerOn
Simulation of "power on". The method last used is ready for operation.
Setup.Initialize
Setup.Initialize.Select
Setting of default values for the following branches:
param: Method parameters (sets empty method '
config: Configuration, branch &Config
setup: Branch &Setup
assembly: Branch &Assembly
all: All values of the entire tree.
Initialization is triggered with &Setup.Initialize $G.
Setup.RamInit
Initialization of the entire working memory. All parameters will be set to de-
fault; error messages will be deleted.
Setup.InstrNo.Value
Device number. Essential for service purposes. The device number must
not be altered.
UserMeth.FreeMemory
$Q queries the size of free memory (in bytes), available for user methods.
UserMeth.Recall
UserMeth.Recall.Name
UserMeth.Store
UserMeth.Store.Name
UserMeth.Delete
UserMeth.Delete.Name
UserMeth.DelAll
Management of the internal method memory: loading, storing and deletion
of methods. The execution of a function is performed by sending $G to the
corresponding node, after entering the method name. Do not use preced-
ing or succeeding blanks in method names!
.DelAll;$G deletes all method in the user memory.
UserMeth.List.1.Name
UserMeth.List.Bytes
for each method
List of all method in the user method memory including method name and
file size in bytes.
param, config, setup,
assembly, all
∗∗∗∗∗∗∗∗
8 ASCII characters
8 ASCII characters
8 ASCII characters
8 ASCII characters
774 Oven Sample Processor, Instrucciones para el uso
$G
$G
')
$G
read only
$G
$G
$G
$G
read only
read only