QIMMIQ Blimp Manual De Usuario página 20

Battery charging instructions:
1. Remove the battery from aircraft before charging, place the adopter and battery socket in right
way (Figure2). When charge it will have Red light on adopter, after 90 minutes when the charge
completed it will be off.
2. During the normal flight, if aircraft light flash rapidly, it means need to replace the battery/re-
charge the battery.
Warning on Li-poly battery:
When charging, please put the drone on a dry area and keep it far away from heat source or explosive devices.
After flying, please do not charge the battery if the surface temperature is still not cool. Otherwise it may cause
a swollen battery or even a fire hazard. Please make sure that you use the original adopter provided with the
drone and when the battery has been used for a long time, or appears to be swollen, please replace them. IF
not in use for a long time will lose its charge automatically Charging or discharging too often may reduce its life.
AIRCRAFT
Protection cover installation instructions:
Distinguish A, B protection cover in accordance with figure 4. Install protection cover in accordance with figure
5 arrow direction. Three clasps aim to the bottom motor's three slots, then press to tighten, after that, connect
protection cover A and B in accordance with figure 4.
All manuals and user guides at all-guides.com