Battery Installation - Yamaha YDRE 2008 Manual De Operación

JW2
MAINTENANCE
Do not disconnect the DC output
cord from the battery receptacle
when the charger is on or an arc
could occur that may cause an
explosion.
3. The charger will turn off
automatically when the batteries
reach full charge.
4. After the charger has turned off,
disconnect the DC output plug
from the golf car receptacle by
grasping the plug body and
pulling the plug straight out of
the receptacle.

Battery Installation

When working with batteries, do
not put wrenches or other metal
objects across the battery
terminals. An arc can occur
causing explosion of the battery.
1. Install the battery holddown
plates and torque to 62-80 in•lb
(0.7-0.9 m•kg, 7-9 Nm) as
shown.
å Forward
∫ Battery
Y-751B
ç Battery holddown plate
2. Connect the wire leads and
torque to 80-89 in•lb (0.9-1.0
m•kg, 9-10 Nm) as shown.
Y-672b
1
2
3
4
5
6
7
8
9
10
11
7-15