F
FIG. 5
ASSEMBLE AND INSTALL TOWEL BAR:
5) Glue the chucked end of the Towel Bar Supports (G) into the holes in the Towel Bar (F). Decide
which end of the island you would like to have the towel bar. To attach the Towel Bar Supports (G)
to the End Apron (E), start two #10 x 2" Pan Head Screws (ZD) through the holes in the inside
edge of the end apron. Align with the holes in the towel bar supports and fasten screws securely.
A
FIG. 6
ZB
ATTACH THE LEAF
6) With the top assembly lying face down on a protected surface, place the Leaf (B) against the back
edge of the top. Attach the Hinges (ZB) to the top, with the knuckle up, about 4" in from each end
and one in the middle. Use #5 x 5/8" Antique Brass Flat Head Screws (ZA). See FIGURE 6.
Attach hinges to the leaf.
Page 6 — 114W
G
E
ZD
ZD
B