Rectifying Malfunctions; Technical Data - Hoberg GT100 Traducción Del Manual De Instrucciones Original

EN

Rectifying Malfunctions

Users of this device may only carry out care and maintenance tasks that are described
in these operating instructions. Only authorised distributors may carry out more com-
plicated repairs.
Fault
The battery is not charging.
The fuse in the fuse box is
triggered.
The device does not start
up when it is switched on.
The grass is not cleanly
trimmed.

Technical Data

Article number:
ID of operating instructions:
Device
Model number:
Rated speed:
Rated voltage:
Power:
Cutting diameter:
Weight:
Cable tie width:
Cable tie length:
Trimmer thread length:
Charger
Manufactured for DS Produkte GmbH
HRB 8937 HL
Am Heisterbusch 1, 19258 Gallin, Germany
Model number:
Input:
Output:
Protection class:
24
Cause
The charger is not inserted
in the plug socket correctly
or the barrel connector is
not inserted in the charg-
ing socket (13) correctly.
The plug socket is
defective.
There is no mains voltage.
Too many devices con-
nected to the same circuit.
The battery is too weak.
The cutting elements are
worn.
04333
Z 04333 M DS V1 1120 dk
GT100
8000 rpm
12 V DC (Li-ion battery; 1500 mAh)
28 W
approx. 21 cm
approx. 1.2 kg
up to 8 mm
max. 120 mm
max. 200 mm
WJG-Y091260500WZ
100 – 240 V ~ 50 – 60 Hz
12.6 V DC, 500 mA
II
Fix
Check the fi t of the parts
and correct it if necessary.
Try another plug socket.
Check the electrical
distributor (fuse box).
Reduce the number of
devices in the circuit.
Charge up the battery.
Replace the cable tie or
trimmer thread.