Maxell YOSO PRO Manual Del Usuario página 4

Never wash this product with water. And, never soak in water or splash
water on this product. (Cause of a failure or short circuit)
Use prohibited Never use, charge or leave this product in places splashed with water or in
in wet areas
damp places, such as in a bathroom. (Cause of a failure or short circuit)
Never modify this product. Only a qualified technician may make repairs.
(Cause of a fire, electric shock, injury, or failure)
Disassembly
prohibited
Check the head for any damage or deformation before use.
(Cause of skin damage)
Never use this product together with other beauty treatment devices at the
same time. (Cause of a failure or trouble)
Never use this product if there is some injury or wound to your skin.
(Cause of skin trouble or pain)
Do not drop this product, or give it a strong impact.
(Cause of injury or a failure)
Prohibited
Do not leave this product in a place where the temperature becomes high
such as the inside of a vehicle. (Cause of failure)
Do not wipe with benzene, thinner or alcohol, and do not spray insecticide.
(Cause of cracking, an electric shock, or ignition)
Use only the original power adaptor. And, do not charge any other product
with the original power adaptor. (Possibility of an electric shock or ignition)
Remove accessories such as earrings and necklaces, and contact lenses for
use. (Cause of an accident or trouble)
If there is any severe skin disorder or irregularity on your skin surface, or due
to downy hair, you may feel strong irritation in rare instances. In this case,
avoid using this product on that region. (Cause of an accident or trouble)
Do not keep the cotton puff on one part of your skin but always keep it in
Make sure motion. (Cause of skin trouble or poor physical condition)
Pull out the power plug and device plug without holding the cord.
(Cause of disconnection, an electric shock, short circuit, or ignition)
When there are people around the device, pay attention to any sudden
movement during use. (Cause of injury)
Make sure to pull out the power plug from the outlet unless used.
(Cause of an electric shock or fire by deterioration)
Unplug
-3-
All manuals and user guides at all-guides.com
Names of parts and their functions (Fig. 1)
Head (titanium material)
Attach cotton and apply it to the skin.
The device vibrate while it is being used.
Mode indicator lamp (orange)
Turn the power switch "On," and
"CLEANSE" will start flashing. Then, it
switches and lights up while the device
is being used.
Mode switch button
Every time the button is pressed, the
mode for use will be switched.
Power switch (" ")
Turn on the power switch, and it will turn
"On." Press it again, and it will turn "Off."
An automatic shutoff function is equipped,
so if the device is not used around 5
minutes, it will automatically turn "Off."
Body
Body socket
Level indicator lamp
LOW (green): MEDIUM (green): HIGH (red)
When the power switch is switched to
"On," the lamp indicating "HIGH,"
"MEDIUM," or "LOW" is turned on.
Preparation before use
How to charge
● Since this is not fully initially charged, charge before first using.
● Make sure to use only 100-240V and use the included power adaptor.
Do not insert and remove the power plug from an electric outlet with
wet hands. (Cause of electric shocks and short-circuits)
Do not use in places splashed with water, such as in a bath,
or in damp places. (Cause of failures or short-circuits)
1. Turn off the switch, and connect the power adaptor to the main body and electric outlet.
(Fig. 2) Charge indicator lamp
During charge : The lamp turns on. (Red)
After charging is completed : The lamp turns off.
If the plug for the device's power adaptor is pushed in with force, or unnecessarily
tilted, the main body socket may be broken.
2. After the standard charging time (5 hours) has elapsed, pull out the power adaptor from
the electric outlet and the main body. (Fig. 3)
● The main body and the power adaptor become slightly hot, however, this is not
unusual.
Level switch button
Every time the button is pressed, "the
strength" of the electrical potential will
change. There will be no change in
vibration strength.
Charge indicator lamp
During charge : The lamp turns on. (Red)
After charging is completed : The lamp
turns off.
Buzzer (Switching sound/warning
sound/finish sound)
Every time the switch or button is pressed,
the switching sound will beep. If the
warning sound beeps while the device is
being used, this is an indication to
recharge your batteries. When each mode
is finished, the finish sound will beep.
Back plate (titanium material)
Batteries (built-in)
Nickel hydride battery: 2
Power adaptor
Model: KH-182B
Instrument plug
Power plug
Cord
Accessories
Rings (two)
Rings for attaching cotton.
Stand
-4-