Samsung HW-J7500R Manual Del Usuario página 9

Adding the Soundbar to an Existing Multiroom Audio System
If the Samsung Multiroom app is already installed for use with
another multiroom audio device, follow these steps to add the
Soundbar.
1. Press and hold the SPK ADD button on the rear of the
Soundbar for more than 1 second.
• There is a notification sound and the message
"ADD SPEAKER" appears on the Soundbar's main
unit. Afterwards, the message "WIFI READY" appears
when standby-for-connection mode activates.
2. Connect your smart device (smart phone, tablet, etc.) to your wireless router.
Internet
3. Launch the Samsung Multiroom app.
4. Touch to go to the list of all speakers.
5. Select More > Add New Speaker in the app, and then follow the instructions on the app screen.
Start screen
c To connect a different network, select No.
You must enter the password of your wireless router to connect your Soundbar to your wireless network
through the Samsung Multiroom app.
If your wireless router does not have a designated password, the app completes the initial settings without
asking you to enter a password.
All manuals and user guides at all-guides.com
Wireless Router
Complete the settings
by following the
instructions on the
Samsung Multiroom
app screen.
Selection of network
· 9 · English
Wi-Fi SETUP SPK ADD
DC 24V
Rear of Soundbar
Samsung
Multiroom
Smart Device
Speaker addition
complete