Troubleshooting - turbionaire Practical 12 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 51
Clearance
Maintain the minimum clearance around the dehumidifier when
the unit is operating as shown in the left drawing.

12. TROUBLESHOOTING

If a condition listed below occurs, please check the following items before calling customer
service.
Problem
The unit doesn't
operate
The dehumidifying
function doesn't
work
Possible Cause
Has the power cord been
disconnected?
Is the tank full indication
lamp blinking? (The tank is
full or in a wrong position.)
Is the temperature of the
room above 35℃ or below
5℃? The protection device is
activated and the unit
cannot be started.
Is the air filter clogged?
Is the intake duct or
discharge duct obstructed?
Solution
Plug the power cord
into the outlet.
Empty the water in the
drainage tank and then
reposition the tank.
The protection device is
activated and the unit
cannot be started
Clean the air filter as
instructed under
"Cleaning the
dehumidifier".
Remove the obstruction
from the discharge duct or
intake duct.
12

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido