Operating Instructions - turbionaire Practical 12 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 51

6. OPERATING INSTRUCTIONS

The indicator features 3 functions:
1.
when the unit is plugged in, it will indicate the room humidity level.
2.
when you set the humidity, it will indicate the humidity that you have selected
3.
when you program the time for the unit to turn on and off, it will show the hours.
4.
When the environment humidity is lower than 35%, it will show 35
5.
When the environment humidity is higher than 95%, it will show 95
OPERATING INSTRUCTIONS
1. The buzzer will buzzing when power on, and the machine will be standby, the POWER
indicator will be green. The POWER light can be used as the indicator light for WIFI
distribution when the machine is powered off.
2. Press
button once to start operation. Press it again to stop operation.
3. Press
bottom to adjust fan speed between high and low, and corresponding indicator
light will on at the same time.
4. Press
to change the set value of humidity as follows:
By pressing
to change the humidity setting value, the humidity setting range is 40% ~
80% and the interval is 5%.HUM indicator light will turn on when humidity is set, and HUM
light will turn off when humidity is set for 5 seconds.
Displays ambient humidity. After a period of working,when environment humidity is lower
than the selected humidity by 2%, compressor will stop and fan stops working 3 mintues
later;When environment humidity is equel to or higher than the selected humidity by 2%,
compressor will restart ,which means 3-minute compressor protection time`s over.
5. Press
button can be timer setting:
when pressed again,
key,
will show from 01-02... to 24 - 00 as a cycle. The timer setting in power off status
is for the that unit to turn on, and the timer setting in power on status is for the unit to turn
off. The timer
function/setting will be cancel everytime when artificially switch the unit
or when water fulled.
and the time LED light will be on, continuously pressing the
1. POWER
2. SETĂRI
3. DISPLAY
4. TIMER
5. VITEZĂ
8

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido