Installing Casters; Draining The Collected Water - turbionaire Practical 12 Manual De Instrucciones

7. INSTALLING CASTERS

a. Take out the casters
Pull out the tank, find 4 casters from the
water tank, then take out the casters and
close the water tank.
b. Remove the rubber feets
Incline Turbionaire Practical 12, and
remove the 4 rubber feets from the
base.
c. Installing the casters
The castor is inserted into the mounting hole of the chassis castor, and then pressed by
hand to push the castor in the vertical direction of the chassis until the castor is in place.

8. DRAINING THE COLLECTED WATER

When the drainage tank is full, the tank full indicator light will turn on, the operation
will stop automatically and the buzzer will beep 15 times to alert the user, that the
water need to be emptied from the drainage tank.
Emptying the Drainage Tank
a. Lightly press on the sides of the tank
with both hands and pull the tank out
gently..
b. Discard the collected water
9