Maytag 3LMEDC100 Manual De Uso Y Cuidado página 8

3.
Select the desired cycle
Select the desired cycle for your load. See the Cycle Guide
for more information about each cycle.
AUTOMATIC DRY Cycles
You can select a different dryness level, depending on your
load, by turning the knob to dryness level.
Selecting More Dry, Energy Preferred, or Less Dry
automatically adjusts the dryness level of the fabrics at which
the dryer will shut off.
AUTOMATIC DRY cycles give the best drying in the shortest
time. Drying time varies based on fabric type, load size, and
dryness setting. Choose Energy Preferred for optimal energy
savings. Less Dry removes less moisture and is used for
loads you may want to put on a hanger to complete drying.
More Dry removes more load moisture. Energy Preferred is
used for a starting point for AUTOMATIC DRY cycles.
4.
Set temperature (on some models)
Select temperature by turning the knob to the desired
position or select the Automatic Dry Cycle that has the
temperature included in the cycle selections.
NOTE: Not all options and settings are available with all
cycles.
8
5.
Select End of Cycle Signal
(if desired)
Turn the END OF CYCLE SIGNAL knob to select the desired
setting (On or Off). The End of Cycle Signal produces an
audible sound when the drying cycle is finished. Promptly
removing clothes at the end of the cycle reduces wrinkling.
6.
Press PUSH TO START to begin
cycle
Push and hold the PUSH TO START knob to begin the cycle.