Publicidad
Idiomas disponibles
Idiomas disponibles
The SIG7710 module programming is carried out in consecutive steps:
1.
using the universal TPE programmer, to select mainly the network parameter (IP, NETMASK, GA-
TEWAY, etc) refer to the user's instructions of the universal programmer and the SIG7710 GENERAL
refer to the user's instructions of the universal programmer and the SIG7710 GENERAL
MENU;
01
HEAD
Line
Freq. In 1204
Lev Out 15
FRACARRO
2.
though the local connection between the module and PC. To carry out the local connection to
the module and enter all the configurations through the integrated web-browser interface, use a PC
with a network adapter (Ethernet card) and an Ethernet CAT-5E crossover cable – refer to the PRO-
GRAMMING INSTRUCTIONS – SIG7710 WEB MANAGEMENT PROCEDURE).
01
HEAD
Line
All manuals and user guides at all-guides.com
5. PROGRAMMING INSTRUCTIONS
to select mainly the network parameter (IP, NETMASK, GA-
PENTA85
CHVU4ZN
FR
DFP85
SIG7901
SIG7710
PENTA85
CHVU4ZN
FR
DFP85
SIG7901
8
KPR41
SAT
SAT
SAT
SAT
SAT
SAT
SIG7710
SIG7710
SIG7710
SIG7710
SIG7710
SIG7710
HEAD-Line
HEAD-Line
HEAD-Line
HEAD-Line
HEAD-Line
HEAD-Line
IP
IP
IP
IP
IP
IP
KPR41
SAT
SAT
SAT
SAT
SAT
SAT
SIG7710
SIG7710
SIG7710
SIG7710
SIG7710
SIG7710
HEAD-Line
HEAD-Line
HEAD-Line
HEAD-Line
HEAD-Line
HEAD-Line
IP
IP
IP
IP
IP
IP
SIG7710
PC
Publicidad
