Furman P-1800 PF Manual Del Propietário página 4

P-1800 PF FEATURES
• Power Factor Technology
powered speakers
• Clear Tone Technology
noise floor and greater dynamic response
• SMP (Series Multi-Stage Protection) with EVS (Extreme Voltage Shutdown)
• LiFT (Linear Filtering Technology) with zero ground contamination
• ri-color multi-segment LED AC voltage meter T
• Four rear panel AC outlets (two filtered and protected outlets and two filtered and protected "High Current" outlets)
• 15A current capacity, with circuit breaker
• Five year limited warranty
INTRODUCTION
Thank you for purchasing a Furman Prestige Series Power Conditioner, and congratulations on your choice. The Prestige Series P-1800
PF Power Conditioner features Furman's revolutionary Clear Tone Technology, transient Power Factor Technology, Series Multi-Stage
Protection (SMP) circuit, and our exclusive Ultra-Wide-Bandwidth Linear Filtering Technology (LiFT). Together, these technologies com-
prise what our customers have grown to expect from Furman: uncompromised protection and purification. The P-1800 PF has been
precisely engineered to more than meet the critical demands of recording studios, broadcast facilities, and discerning musicians alike.
Unique to the Furman P-1800 PF are Clear Tone and Power Factor Technologies, which were developed specifically to address the
needs of professional musicians. Whether playing in a stadium, bar, rehearsal space, or studio, every venue has one thing in common:
the AC power is supplied from the local utility. What's worse is that the power supplied from the building's AC outlet is typically poor,
thanks to increasingly over taxed power lines and raised line impedance. In fact, the quality of AC power has been so poor for so long,
most musicians have no idea how great their instrument amplifiers could really sound.
When the AC transient power factor is poor and the line impedance is high, amplifiers sound muddy because their power supplies sim-
ply can't deliver when pushed. The scream and cry from a guitar loses bite and harmonics, bass guitars lose their punch and weight,
keyboards sound nasal and lose clarity, attack, and extension.
Furman's P-1800 PF addresses this issue - allowing instrument amplifiers and powered studio monitors to sound their best while offer-
ing comprehensive protection at the same time.
DESCRIPTION
Power Factor Technology/Clear Tone Technology
The P-1800 PF's Power Factor Technology actually lowers the AC line impedance supplied by your wall outlet, while storing energy for
peak current demands. In fact, there are over 45 amps of instantaneous peak current reserve in the Furman P-1800 PF. Additionally,
with Clear Tone Technology, every nuance of your sound is revealed due to the exceptionally wide bandwidth of the P-1800 PF's linear
filter. Most AC filters reduce substantial levels of noise, but typically in frequencies above audibility. The P-1800 PF scrubs the AC line
noise in the range your instrument produces its harmonics and tone character. Whether you want squeaky clean, punchy, stinging, or
grunge, YOU control your sound - not your local AC tap.
SMP (Series Multi-Stage Protection) with EVS (Extreme Voltage Shutdown)
Furman's SMP (Series Multi-Stage Protection) surge suppression virtually eliminates service calls and costly "down time". Traditional
surge suppression circuits sacrifice themselves when exposed to multiple transient voltage spikes, requiring the dismantling of your
system, and repair of your surge suppressor. Not so with Furman's SMP. With SMP, damaging transient voltages are safely absorbed,
clamped, and dissipated. Your connected equipment is protected, while your Furman protects itself.
Unique to Furman's SMP is its unparalleled clamping voltage. While other designs offer clamping voltages that are well above 330 Vpk,
Furman's SMP clamps at 188 Vpk, (133 VAC RMS) even when tested with multiple 6000 Vpk - 3000 amp surges. This unprecedented
level of protection is only available with Furman's SMP technology. Additionally, Furman's trusted EVS (Extreme Voltage Shutdown)
circuitry protects against catastrophic overvoltage conditions (such as all-too-frequent accidental connections to 208 or 240 VAC or an
intermittent neutral) by shutting off the incoming power until the overvoltage condition is corrected and the power switch is reset.
4
All manuals and user guides at all-guides.com
P-1800 PF OWNER'S MANUAL
with 45 amps peak current reservoir provides current-on-demand for instrument amplifiers and
provides AC noise filtering circuitry engineered specifically for instrument amplifiers to provide a lower