Conergy IPG T Serie Instrucciones De Servicio página 96

Conergy IPG T series
(4)
7. Tighten the cable screw connection M32 [4] (12 Nm). The
cable must be firmly seated.
Risk of injury due to electrical hazards
When commissioning, the electrical system may still present
a hazard despite careful installation and compliance with the
basic safety instructions. These hazards include:
| Direct contact with electrically live system components
| Electrostatic processes
| Short circuits and overloading
(8)
(7)
8. Plug the mains connector in the AC Out socket (5) (see
figure 3.1, page 16, item (5)).
Operating manual
5 Installation
(5)
(6)
33