ECRON PTC907Y-L Manual De Usuario página 25

assembling or disassembling parts and before cleaning.
Remove by grasping the plug - do not pull on the cord.
15. A common cause of overheating is deposits of dust and fluff
entering the heater. Ensure these deposits are removed regularly
by unplugging the heater, allowing it to cool and cleaning as
described in the MAINTENANCE section.
16. Be sure that no other appliances are plugged into the same
circuit with your heater as an overload can occur.
17. Avoid the use of an extension cord as the extension cord may
overheat and cause a risk of fire.
18. Do not use the appliance for other than its intended use.
EN
19. Do not use outdoors. FOR INDOOR USE ONLY.
20. Do not leave the appliance unattended when switched on.
21. Do not place objects on the product or allow objects to
obstruct the inlet or outlet openings, or operate in close
proximity to walls or curtains, etc. Do not cover the unit when in
operation.
22. The heater must not be located immediately below a
socket-outlet.
23. The use of attachments or accessories not recommended or
25