Connecting The Conergy Smartcontrol - Conergy SmartControl System Manual De Uso

Second CAN converter
Conergy SmartControl System
If two inverters are to be connected to the Conergy
SmartControl monitoring unit, you will need two CAN
converters.
3. Push the second CAN converter onto the DIN top-hat rail.
The distance between the first CAN converter and second
CAN converter is 2 cm.
6.5

Connecting the Conergy SmartControl

Fig. 6-8: Connections of the Conergy SmartControl ((A) upper
and (B) lower side)
Operating manual
6 Assembly and installation
(A)
(B)
43