Connecting The Power Supply Unit - Conergy SmartControl System Manual De Uso

6 Assembly and installation
Connecting the inverter
48
The Conergy IPG series central inverters offered at present
still do not have a CAN interface, and so you will need a CAN
converter for each inverter.Chapter 6.4, page 41 tells you
about the installation and Chapter 6.8, page 51, how to
connect one or two CAN converters.
6.6

Connecting the power supply unit

Fig. 6-12: Power supply unit connections
The power supply unit is connected to the Conergy
SmartControl via the DIN top-hat rail and the mounting rail
bus connectors. This connection supplies the power to the
Conergy SmartControl.
Connection
1 2 3 4
Operating manual
Use
1 L
2 n
3 PE
4 Do not use
Conergy SmartControl System