Conergy SmartControl System Manual De Uso página 73

7 Commissioning
Status Measu Transfe
re r
72
Alarm Meaning
No modem
feedback
signal
Communicati
on fault
Conergy
SmartControl
reboots
Configuration
fault;
internal fault
Internal fault
Internal fault
Internal fault
Operating manual
Possible cause and remedy
The modem was unable to
establish a connection.
| Check your telephone system.
The transmission was
unsuccessful despite an intact
Internet connection. There is no
confirmation of data transfer
from the system monitoring
portal. The Conergy
SmartControl redials and keeps
trying to transmit the data.
| If the fault continues longer
than 48 hours, contact
Conergy Service.
| If this process is continually
repeated, contact Conergy
Service.
An Internet provider has
changed its dial-in data, for
example.
| Contact Conergy Service.
The internal modem of the
Conergy SmartControl was not
detected.
| Contact Conergy Service.
Despite a correct modem
connection, no Internet
connection is established; the
other end does not answer.
| If the fault continues longer
than 48 hours, contact
Conergy Service.
The Internet connection was
broken off unexpectedly.
| If the fault continues longer
than 48 hours, contact
Conergy Service.
Conergy SmartControl System