Setting The Clock - Hiyasu ASE1297T12i Manual De Funcionamiento

Manual 06-05ENG 6/5/05 17:26
PRECAUTIONS
●
Static electricity and other factors (extremely high voltage) may cause the remote clock to
require resetting. If this happens (you will know because the two dots in "0:00" will be flas-
hing), reset the time before you switch the device on.
Página 81

SETTING THE CLOCK

Replacing the batteries
Before you switch on the air conditioner, set the
remote control clock by following the procedures
indicated in this section. The remote control clock
panel will display the time, regardless of whether
the air conditioner is in use or not.
Initial setting of clock
Once the batteries have been fitted to the remote
control, the clock panel will display "0:00" and the
two dots will be flashing.
1. Time adjust button
●
Press this button to set the time
▲ Forwards.
▼ Backwards.
●
Every time you press the button, the time will
move forwards or backwards one minute,
depending on which side you press it.
The time will change at the speed at which you
are pressing the button.
2. OK button
●
When you press the OK button, the time viewer will
stop flashing and the clock will start to function.
3. Resetting the clock
●
Press the CLOCK button on the battery compart-
ment. The two dots in the time will start to flash.
To set a new time, follow steps 1 and 2 in "Initial
setting of clock".
★
The clock accuracy has a margin of 10 seconds per
day.
81