Names And Functions Of Indicators On Remote Controller - Hiyasu ASE 18UIAM Manual De Funcionamiento

06Manual 26Hiyasu ENG 2/1/07
REMOTE CONTROLLER SPECIFICATIONS

Names and Functions of indicators on Remote Controller

Display Panel
1- TRANSMISSION Indicator:
This indicator lights when remote controller transmits signals to indoor unit.
2- MODE indicator:
Displays the current operation modes.
Including AUTO
HEAT only available for heat pump model.
TEMPERATURE indicator:
3-
Displays the temperature settings(17 to 30 ).
4- FAN SPEED indicator:
Displays the selected fan speed, AUTO
and three fan speed levels LOW
HIGH . Displays
operating mode is either AUTO or DRY.
5- SLEEP/TURBO indicator:
Each time the Sleep/Turbo button is pushed, the
signal displays in the following sequence:
SWING indicator:
6-
This indicator lights up when the SWING button is pressed.
7- TIMER indicator:
The time set for timer operation is indicated. (0.5 ~ 24 hours)
• All items are shown in the Fig.2 for the purpose of clear
presentation But during the actual operation only the relative
functional items are shown on the display panel.
54
15:25 Página 54
, COOL , DRY , HEAT
, MED ,
(flashing) when the
NOTHING NOTHING
TURBO
NOTE
or FAN .