Kohler K-10441 Guia Del Usuario página 3

Handle
Bonnet
Indexer
Splines
Optional Temperature Limiting Adjustment
NOTE: Before adjusting the water temperature limit, ensure that the
handle is turned all the way to the left. This is the maximum hot
position.
Remove the plug button, setscrew, handle, and bonnet from the
valve stem.
Position the indexer to stop the valve stem at the desired
maximum temperature.
Confirm the setting by turning the water on, then rotating the
valve stem to the full hot position. Repeat the above procedure
until the desired temperature is reached.
Reinstall the bonnet, handle, setscrew, and plug button on the
valve stem.
Lifetime Limited Warranty
Kohler Co. warrants its faucets manufactured after January 1, 1997, to
be leak and drip free during normal residential use for as long as the
original consumer purchaser owns his/her home. *If the faucet should
leak or drip during normal use, Kohler will, free of charge, mail to the
purchaser the cartridge necessary to put the faucet in good working
condition.
Kohler also warrants all other aspects of the faucet, except gold finish,
to be free of defects in material and workmanship during normal
residential use for as long as the original consumer purchaser owns
his/her own home. If a defect is found in normal residential use,
Kohler Co.
Setscrew
Plug
Button
Valve Stem
3 1059390-5-C