Troubleshooting; Charging - Wilfa UNI Manual De Instrucciones

TROUBLESHOOTING

EN
OVERLOAD WARNING
The scale is overloaded, remove weight from the scale (maximum weight is
2000g).
UNSTABLE WARNING
Unable to activate the scale because the scale is unstable. Place the scale on a
flat and level surface.
BATTERY STATUS
• If the battery is 10% or lower when the user is turning on the scale this
warning shows on the display. The warning is visible for 2 seconds before the
scale turns on.
• To show battery status, long press the on/off button for three seconds, and
the battery percent will show before the scale turns on/off.

CHARGING

To charge the scale, plug the USB cable into the USB port located at the back of
the scale. When charging, the display only shows the battery percent.
INSTRUCTION MANUAL · UNI BLACK
8