Descargar Imprimir esta página

Peg-Perego agio Z3 Adapter for car seat Instrucciones De Uso página 5

Publicidad

_ WARNING: When using
the infant car seat in the
car, check the adapters
are not attached onto the
infant car seat. Remove
the adapters from the
infant car seat before
installing it in the car.
_ WARNING: The adapters
must always be attached
onto the chassis. Never use
the infant car seat with the
adapters attached unless it
is being used on the chassis.
ns
_ This product is not a toy.
Do not let your child play
with this product.
ng
_ The assembly and
preparation of the
product must be carried
out by an adult
s
_ Do not use this product if
there are parts missing or
signs of breakage.
NOTICE
t
THIS ARTICLE MEETS
OR EXCEEDS ALL
REQUIREMENTS COVERED IN
ASTM F833-15 STANDARD
Instructions for use
1 Z3 Adapter for car seat can be used
t.
on the Z3 chassis to engage the car
seats indicated in this manual.
2 Pull the front bar outwards to
remove it (fig a). Unfasten the cover
elastics on both sides (fig b).
3 Slightly close the chassis.
Rotate the armrest to unfasten it from
the cap, as shown in figure (fig. a).
To completely remove the armrest,
pull it outwards on both sides.
Finally reattach the cover elastics to
the chassis (fig. b).
4 Frame with no armrests. Keep the
two armrests for future use.
To reassemble the armrests, read the
stroller's instruction manual.
5 To fasten the Z3 car seat adapter,
look carefully at the fastening
direction.
When fastening the adapter, ensure
the button is in front of the adapter
and not behind it, as shown.
Fasten the adapters to the frame as
shown.
6 WARNING: Adapter fastened incorrectly.
7 Before securing the car seat to the
stroller, unfasten the stroller's hood.
You can then fasten the car seat, until
it clicks into place, with the child
facing mom.
To remove the car seat from the
frame, read the car seat's instruction
manual.
To remove the Z3 car seat adapter,
reverse the fastening procedure.
PEG-PÉREGO S.p.A.
Peg Pérego can make changes at
any time to the models described
in this publication for technical or
commercial reasons.
5
ITA
1 Z
a
s
2 S
S
(
3 C
R
C
T
c
s
I
(
4 T
b
P
m
5 P
a
Q
a
a
A
6 A
e
7 P
p
d
E
f
m
P
r
a
P
i

Publicidad

loading