Filter Life Counters; Locking/Unlocking The Keypad - Hunter HEPAtech 30721 Manual De Instrucciones

Filter Life Counters

The pre-filter and filter are critical to the proper operation of the air purifier. To help you
know when to clean or change the filters, your Hunter Air Purifier has Filter Life Counters that
will monitor the percentage of life your filter has left. Although the exact life of the filters
depends on the environment, the table below gives typical usage times of the filters.
Table 2: Typical Usage Times of the Filters
Activated Carbon Pre-Filter
The display shows the percentage of life left since the counter was reset. NoTE: The per-
centage level drops in 5% increments.
The values of the Pre-Filter and Filter Life Counters are stored in the air purifier's memory.
The unit may be unplugged and moved or stored without losing the Pre-Filter and Filter
Counter values.
To properly track filter usage, the Pre-Filter and Filter Life Counters should be reset each
time the filters are changed or cleaned. Refer to Changing the Pre-Filter (pg. 11) orChang-
ing the HEPAtech® (pg. 12) for instructions on how to reset the counters.

Locking/Unlocking the Keypad

once you enter the desired speed, you may want to lock the keypad to prevent accidental
changing of the speed. When the keypad is locked, all keys will be disabled. If you press a
key, the Keypad Locked Indicator will be displayed on the screen for 1-2 seconds.
To Lock or Unlock the Keypad:
1. To lock the keypad, press and hold the UP/DoWN keys
simultaneously for 2-3 seconds. The Keypad Locked Indica-
tor will appear on the display. Refer to Fig. 9. After releasing
the keys, the Keypad Locked Indicator will disappear.
2. To unlock the key pad, press and hold the UP/DoWN keys
simultaneously for 2-3 seconds. The Keypad Indicator will
disappear and the keypad will be functional.
All manuals and user guides at all-guides.com
Filter Type
HEPAtech® Filter
9
operation
Typical Usage
1400 hours
2800 hours
Fig. 9
43007-01