Installing Power Supply - Mettler Toledo SevenExcellence Manual De Usuario

2 Then insert the foot of the meter to the arm base
and shift the meter in the direction of the arrow to
make the foot fit.
3 Use the lock screw to attach the meter to the base
of the arm.

4.4 Installing power supply

WARNING
Danger of death or serious injury due to electric shock!
Contact with parts that carry a live current can lead to death or injury.
1 Only use the METTLER TOLEDO AC adapter designed for your instrument.
2 Keep all electrical cables and connections away from liquids and moisture.
3 Check the cables and the plugs for damage and replace damaged cables and plugs.
NOTICE
Danger of damage to the AC adapter due to overheating!
If the AC adapter is covered or in a container, it is not sufficiently cooled and overheats.
1 Do not cover the AC adapter.
2 Do not put the AC adapter in a container.
The instrument is operated using an AC adapter. The AC adapter is suitable for all supply line voltages ranging
from 100...240 V AC ±10% and 50-60 Hz.
1 Insert the correct connector plug into the AC adapter until it
is completely inserted.
2 Connect the cable of the AC adapter with the DC socket of
the instrument.
3 Install the cables in such a way that they cannot be
damaged or interfere with operation.
SevenExcellence™ Putting into Operation​ ​ 19