Cleaning; General Precautions - Becken BOR 2330 Manual De Instrucciones

circumstances as this may be dangerous. To avoid fire hazard or electric shock do not expose your appliance
to humidity or water. Furthermore, do not place your appliance under water (e.g. for cleaning).

1.4. Cleaning

Before cleaning, be sure to switch off the appliance and remove the plug from the main power supply. Always
allow the unit to cool down before cleaning.
To clean the exterior of the product use a dry soft cloth only.

1.5. General Precautions

• Please follow the instructions in the user manual which help to properly install and operate this product and
enjoy its advanced features. Please keep the instructions for future reference.
• Read all instructions before using the product.
• Maintenance and service operations are only to be carried out by authorized professionals.
• Any damage caused by manual modifications to the product is not covered by the warranty.
• If this product is used for other purposes than the ones originally intended, or if it is not correctly connected,
the product may become damaged and the warranty will be voided.
• The product is for household use only.
• Connect the appliance to a single phase AC supply with the voltage specified on the rating plate.
• Figure means "DO NOT COVER".
• In order to avoid overheating, do not cover the heater.
• Never leave the heater unattended while it is in use. Always turn the product to the OFF position and
unplug it from the electrical outlet when not in use.
• Extreme caution is necessary when any heater is used by or near children, handicapped or elderly people
and whenever the heater is left unattended while it's turned on.
• The heater must not be located immediately below an electrical socket outlet.
• Do not run the cord under carpeting and do not cover the cord with throw rugs, runners or the like. Keep
the cord away from busy areas and where it will not cause anyone to trip over it.
• Do not operate the heater with a damaged cord or plug, or after the heater malfunctions, has been dropped
or damaged in any manner.
• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard.
• Avoid the use of an extension cord as this may overheat and increase the risk of fire.
• Use the oil radiator in a well-ventilated area. Do not insert or allow objects to enter any ventilation or
exhaust opening. To prevent a possible fire, do not block air intakes or exhaust openings in any manner. Do
not use on soft surfaces, like a bed, where openings may become blocked. Use the oil radiator on flat, dry
surfaces only.
AF Manual Instruções Irradiadores A4 EN.indd 5
Oil radiator | Radiador de aceite | Irradiador a óleo
EN
5
22/07/16 12:12