Tools Required - Whittier Wood Products Hawthorne Island 359W Instrucciones Para Armar

Before beginning assembly, check that the quantities of the parts received match those on the parts list below.
ID Description
A Center Piece and Leaves . . . . . . . . . . . . . 1
B Apron Assembly (attached) . . . . . . . . . . 1
B1 – Front Back Apron . . . . Qty 2
B2 – End Apron . . . . . . . . . Qty 2
B3 – Table Slide . . . . . . . . . Qty 2
B4 – Leg Brace . . . . . . . . . . Qty 4
F — Hinge — Qty. 6
G — #8 x 5/8" Pan Head
Screw — Qty. 36
Phillips Head Screwdriver, Mallet or Padded Hammer, Wood Glue, 9/16" or adjustable wrench.
We recommend finishing the unit before final assembly. Before finishing, read the enclosed
Finishing Hints sheet. To test for desired color apply stain to bottom of top. See Figure 2.
FIG. 1
1. Lay out the wood parts in their approximate location to aid in the identification and assembly.
Page 2 – 359W
359W Hawthorne Island
HARDWARE
H — Wood Dowel — Qty. 8
I — #8 x 1¼" Pan Head
J — 3/8" x 2½" Hex Bolt
ASSEMBLY INSTRUCTIONS

TOOLS REQUIRED:

Parts List
QTY. ID Description
C Rack End Support . . . . . . . . . . . . . . . . . . 2
D Leg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
E Rack Assembly . . . . . . . . . . . . . . . . . . . . . 1
Screw — Qty. 8
— Qty. 4
IMPORTANT:
K — Washer — Qty. 4
L — Pad — Qty. 2
QTY.