Environment Protection; Declaration Of Conformity - ST MST20-255 Manual Del Usuario

with a rating of 230V or 240V can also be connected to a 220V supply)
• This tool is not suitable for wet cutting
• After switching off your circular saw, never stop the rotation of the saw blade by a lateral force applied
against it
• Never use circular saw blades made of high speed steel (HSS)
• Never use grinding/cutting discs with this tool
• Do not work materials containing asbestos (asbestos is considered carcinogenic)
• Take protective measures when during work dust can develop that is harmful to one's health,
combustible or explosive (some dusts are considered carcinogenic); wear a dust mask and work with
dust/chip extraction when connectable
• Do not attempt to cut extremely small workpieces
• Remove all obstacles on top of as well as underneath the cutting path before you start cutting
• Do not work overhead with the tool
• Only use a saw table provided with a switch that prevents restarting of the motor after interruption of voltage
• Only use a saw table provided with a kerf guide
• Always disconnect plug from power source before making any adjustment or changing any
accessory
WHEN CONNECTING NEW 3-PIN PLUG (U.K.ONLY):
• Do not connect the blue (= neutral) or brown (= live) wire in the cord of this tool to the earth terminal of the
plug
• If for any reason the old plug is cut off the cord of this tool, it must be disposed of safely and not left
unattended
Your machine is double insulated in accordance with EN61029; therefore no earthwire is required.
MAINTENANCE
Make sure that the machine is not live when carrying out maintenance work on the motor. Regularly
clean the machine housing with a soft cloth, preferably after each use. Keep the ventilation slots free from dust
and dirt. If the dirt does not come off use a soft cloth moistened with soapy water. Never use solvents such as
petrol, alcohol, ammonia water, etc. These solvents may damage the plastic parts.
The machine requires no additional lubrication.
If a fault occur, e.g. after wear of a part, please contact your local dealer's service.

ENVIRONMENT PROTECTION

In order to prevent the machine from damage during transport, it is delivered in a sturdy packaging. Most of
the packaging materials can be recycled. Take these materials to the appropriate recycling locations. Take
your unwanted machines to your local dealer. Here they will be disposed of in an environmentally safe way.
Discarded electric appliances are recyclable and should not be discarded in the domestic waste! Please
actively support us in conserving resources and protecting the environment by returning this appliance to the
collection centres (if available).
We declare under our sole responsibility that this product is in conformity with the following standards or
standardized documents:
EN55014-1:2006/+A1:2009+A2:2011; EN55014-2:1997/+A1:2001+A2:2008, EN61000-3-2:2014, EN61000-3-
3:2013; in accordance with the regulations 2006/42/ЕEС, 2014/30/ЕEС.
NOISE/VIBRATION Measured in accordance with EN61029 the sound pressure level of this tool is <91 dB(A)
and the sound power level is <104dB(A) (standard deviation: 3 dB).
Sliding Gehrungssäge
EINLEITUNG
Das Elektrowerkzeug ist bestimmt, als Standgerat Langs- und Querschnitte mit geradem Schnittverlauf in Holz

DECLARATION OF CONFORMITY

EN61029-1:2009/A11:2010, EN61029-2-9:2012+A11:2013, EN60825-1:2007
1