• Make sure the blade is properly
installed. Before applying power, rotate
the motor shaft by hand using a screw-
driver in the motor shaft as shown.
NOTE: To prevent blade holder damage,
do not use pliers to tighten knob.
Dust Blower
The dust blower will direct air to the most
effective point on the cutting line when the
hold down is adjusted. No adjustment is
necessary to the blower.
Blade Guard
The blade guard will always be positioned
parallel to the blade. No adjustment is
necessary.
Sawdust Collection Port
The collection port will help to control
sawdust. Simply attach a 1-1/4" wet/dry
vac hose into the opening.
Blade
Guard
17
Dust Blower
Sawdust Collection
Port