Sony ZS-M35 Manual De Instrucciones página 54

Labelling recordings (Name Function) (continued)
Notes
• When recording a CD
containing CD text
information, a track
name appears in the
display at the time of
labelling. Change the
name according to step
3 on page 52, if
necessary, then press
YES• ENTER. The
track names that have
been labelled on a CD
will not be recorded on
an MD until you press
YES•ENTER to
confirm it.
• Certain characters
contained in the CD
text information (É, å,
ñ, ç, ß, [,], etc.) cannot
be labelled on the MD.
These characters will
be labelled as blanks on
the MD.
GB
54
Editing recorded tracks on the MD
During REC IT recording
You can label a track name only. You can input up to
100 characters.
1
During recording, press EDIT.
The display waits for the input of the characters.
2
According to steps 3 and 4 on page 52, label a
track.
3
Press YES•ENTER.
The name is labelled on the MD.